If you’re living in a rural area where transmission signals are coming from different directions, it could be challenging to get good reception. Even if you have an efficient and reliable antenna brand, pictures might still seem blurry, and sounds just don’t seem clear.
Combining two TV antennas will help you eliminate this problem. You will need two antennas and the best TV antenna combiner.
The two antennas will be connected to each other using a TV antenna combiner. We have scoured the net for the best products. We’ll also toss in some tips on properly using an antenna combiner.
Our Top Picks for the Best TV Antenna Combiner
Overview:
| Brand | Product Dimensions | Weight in ounces | Insertion loss | Type | Package inclusions |
|
|
5.38 x 2.5 x 0.88 inches | 5.6 | 2 Db | Combiner | Joint antenna, 2 Outdoor Mounting Zip Ties,2 Mounting Screws, and Instruction Sheet |
| No products found. | 13.58 x 8.46 x 3.15 inches | 4.35 | 2 Db | Combiner | 1x active antenna splitter (470-870MHz EU & UK / 470 – 608MHz US), 1x NT3-1 power supply with either EU, UK, US adapters, and4x BNC interconnect cables |
| 5 x 1 x 3 inches | 1.6 | 4 Db | Splitter and Combiner | It’s a 2-in-1 product that can be used as a splitter or as a TV antenna combiner | |
| 18.11 x 14.8 x 3.78 inches | 8.14 | Not specified | Combiner | rack mount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, power splitter cable, and user guide | |
| Weatherproof MATV Antenna Combiner/Joiner/Separator, Combines Full Band UHF/VHF Antennas | NA | 8 | VHF loss 0.5dB, UHF loss 1dB | Combiner, joiner, and separator | Cable |
| Linear 2514 Channelplus Dc & IR Passing 4-Way Splitter/Combiner | 3.2 x 2 x 0.2 inches | 2.4 | 8 dB | Combiner and splitter | Coaxial cable |
| No products found. | 7 x 6.25 x 5.5 inches | 5.6 | minimal | Antenna coupler | cable ends, pole and joist adapters |
| No products found. | 3.27 x 3.19 x 0.47 inches | .317 | minimal | 3-Way F-Type male to 2 Female | 2 pcs 3-way F-Type male to 2 female Combiner Splitter, Satellite receiver, cable box |
| No products found. | 4.25 x 5.5 x 1.75 inches | 4 | minimal | VHF UHF antenna combiner | UHF/VHF combiner (diplexer), all-weather Housing, and mounting hardware |
| No products found. | 6 x 6 x 3 inches | 14 | minimal | Amplifier, 5g filter, and combiner | Preamp, combiner, filter, and the power source for the preamp |
Say goodbye to ghosting and multiple interferences. You can also enhance your TV reception by combining TV antennas. We have the best solutions for you.
You can use Channel Master to join two antennas of different frequencies or two antennas of the same frequencies.
Insertion loss is inevitable when you’re combining two antennas. This is referred to as the loss of signal when a TV circuit travels to and from the power source. And we find the Channel Master to have quite a low insertion loss.
Compared to regular brands in the market, it only has a 2Db signal loss. And this is an ideal way of combining two signals that come in two different directions.
In addition, it is compact and has a solid construction. To get the best results, make sure to use the same length of cables for the two antennas that you will be combining.
What we love about it
- Can increase the number of channels your TV pulls up
- It is lightweight, compact yet sturdy
- There is a very minimal insertion or signal loss
- Works just well after hooking it up
- Can be used for outdoor applications
- It has an LTE filter that can improve over-the-air signals
What not to love about it
- Might not work if only one of the antennas can pick up a signal
What we think about it
If you have two antennas receiving directions from two directions, this is a great antenna joiner and combiner. It also has a low signal loss. But if you are living very near transmission towers, you might not see the value of this.
This is the best TV antenna signal combiner if used for in-ear transmitters.
IEM or in-ear transmitters work using wireless technology. It functions in the same way as a stereo radio does.
The signal will be a wireless transmission via the antenna and a combiner!
What we love about it
- It can combine four wireless stereo transmitters using a single antenna
- Compatible with G3 and G4 signals, hence you will be able to accept different signals from various frequencies
What not to love about it
- Limited application
What we think about the product
This is one of the best combiners you can use for IEM transmitters, probably the best of its kind.
-
Shure PA411 Four Port Antenna Combiner- Distributes DC power and RF signal while reducing rack clutter for up to four PSM300 systems
- Features a wideband 470-865 MHz frequency range
- Main RF output connector connects to any antenna with a BNC connector; RF LED indicators display signal present and signal overload per input
- Power output distributes DC power to PSM transmitters (accessory power cable required); features a front panel power switch
- Includes PA411, rack mount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, power splitter cable, and user guide
The Channel Plus 2-way splitter is a rather versatile product. You can use it to break up a signal or combine two signals into one coaxial cable.
It works best when combining two antennas of the same signals or frequencies.
Thus, this can be used as a splitter or TV antenna combiner. So you’ll be getting more value for your purchase.
It also has a low insertion loss at only 4 Db.
What we love about it
- It’s a 2-in-1 product that can be used as a splitter or as a TV antenna combiner.
- It has a low signal loss
- It is well constructed and came in nicely packed
What not to love about it
- You have to know how to use it properly; otherwise, the signals will fight against each other.
What we think about it
We think this is an excellent value for your money. It is a two-way splitter. But when used in reverse, it also functions as an antenna combiner. And this is an excellent option if you combine antennas of identical signals.
4.
This versatile product can combine and send signals for up to four Shure transmitters.
This is also a very compact system. So it’s perfect for you if you need a minimal setup.
It also has a sleek front panel with a LED indicator for the signal output.
What we love about it
- It has a LED indicator that shows signal overload
- It has a Wideband 470 to 865 MHz frequency range
- It is compact and makes up for a clutter-free setup
- The main RF output can connect to an antenna with a BNC
What not to love about it
- There may still be RF losses depending on your locations
What we think about it
This compact antenna combiner can make up for a more elaborate yet clutter-free system. It rids the need for multiple antennas and transmitter stations. So if you need to connect up to 4 transmitters yet want a minimalist setup, you need this.
This is an ideal antenna combiner if you need to sort out your VHF and UHF channels.
If you have UHF signals that always overwhelm VHF signals, it’s time to diffuse or separate them. And you can also do that with this TV antenna combiner.
You can use it to connect two signals into a single antenna. And you can also use it to separate UHF and VHF signals. It’s a VHF UHF combiner and separator in one.
We have other units that are suitable for outdoor applications. But this is the most weatherproof unit. It can endure extreme weather conditions and can last longer.
What we love about it
- It is weatherproof and can stand the harsh elements
- It’s versatile and can be used to merge signals into one antenna or diffuse signals of different frequencies
- It has a good and solid built
- Relatively low insertion loss in VHF channels
What not to love about it
- It may have a more significant UHF channel signal loss
What we think about it
This ideal antenna combiner can be used to organize your VHF and UHF channels.
6.
Linear 2514 Channel Plus can be used as a signal splitter or a combiner.
We tried using it to connect two outdoor HDTV antennas, and it worked great. It was able to distribute signals to multiple television sets in the house.
But you have to ground it correctly and ensure the cables are properly connected; otherwise, it might not work.
And when appropriately installed, it can pull in an additional 30 over-the-air channels to your TV. It also allows DC signals to pass, setting it apart from other splitter brands.
What we love about it
- DC signal can also pass through the cables
- Can be used as a splitter or an antenna combiner
- Can pull in more channels when properly installed
What not to love about it
- It’s not that easy to install
What we think about the product
These are very efficient combiners to join two outdoor HDTV antennas; they will be able to bring in multiple frequencies.
Connect two antennas with one mast and never worry about signal loss again.
This is an excellent splitter and combiner in one. You can connect two antennas of varying cable lengths, which will still work well. The pictures will come off crystal clear with crisp sounds.
It also works even if the two antennas have varying cable lengths. So it somehow can be more universal.
What we love about it
- Low signal loss in both frequencies
- Works well with two identical or two different antennas
- It’s simple to mount and has no maintenance
- Can work with both passive and powered antenna
What not to love about it
- It’s not that weatherproof
What we think about it
This is a versatile and easy-to-mount combiner and splitter in one. But if you will use it for outdoor applications, make sure you cover it with a weatherproof box or encasement.
These F connectors may even do a better job than your regular splitters and combiners.
We find this product efficient and can merge multiple HDTV signals in fringe areas.
It’s pretty easy to install, and it’s toolless, needless to say. It’s also easy to disassemble should the need arise.
The signals come in with crystal clear pictures and crisp sounds
What we love about it
- Easy to assemble and disassemble
- Toolless installation
- Gives off crystal clear pictures for HDTV indoor antennas
What not to love about it
- The construction is a bit flimsy
What we think about it
This is one of the best combiners you can use to merge multiple indoor HDTV antennas.
This is a weatherproof combiner splitter perfect if you are using single-band antennas.
You can enhance the capacity of your antennas too. So expect that more channels will pop up on your TV screen,
It can pull in signals for UHF or VHF TV reception. The signal loss is very minimal too. And If you have distant VHF cable signals, this is the perfect TV antenna combiner. Though it can also work for UHF channels, it may not perform as great.
What we love about it
- Excellent VHF reception
- Ideal for indoor applications
- Can enhance the capacity of both your VHF and UHF antennas
What not to love about it
- Not that long-lasting
What we think about it
This Is excellent for VHF frequencies.
This product is an antenna preamp combiner in one.
You can pull in as many as 65 channels and eliminate the pixelated images with one product.
Setup is easy, just set it up like any other antenna preamplifier.
You’ll get more value from this. It has good construction and does not need to be tuned.
What we love about it
- Excellent customer service
- The best product of its kind, a combiner, 5g filter and preamp
- Can pull in more channels
- Makes crystal clear images
What not to love about it
- It may be tricky to buy if you already have a working preamp
What we think about it
It’s a high-end product with a premium price. And it’s the best of its kind, so if you need a preamp and a combiner in one, we highly recommend this.
Why Use an Antenna Combiner
If you live in areas where signal transmission comes from opposing directions, you need a TV antenna combiner.
The question is, why not just combine two different antennas pointed in each direction and just use a regular 2-way splitter?
Because that isn’t how things work. You need to buy separate antennas for each frequency and combine them into one cable, but you still need an antenna combiner to make it successful.
Combining two antennas into one coax is one thing, but you need a combiner to be able to merge the signals perfectly.
Otherwise, this can result in ghosting or multiple interferences. And this can result in no signal at all.
We have several solutions for you.
To prevent multiple signal interruptions, you can opt to buy a UHF AND VHF combiner.
This product can combine two antennas but separate the frequencies. So you have one position for each frequency, which helps keep things organized and prevent interference.
The second option is to purchase an RF switch. It works if you have an antenna running into a TV already. But make sure that it is properly grounded and that the cables are attached properly.
And the last option is to get two separate antennas and use a splitter/combiner. Then connect them to one coax cable.
FAQs:
Are there different types of combiners?
This is perfect if you have signals coming from opposite directions.
Can you use commercial combiners for your antennas at home?
What are the advantages of a signal combiner with two antennas?
Conclusion
Whether you need to combine two different antennas or two identical antennas, we have the best TV antenna combiner for you. Don’t go old school, and you need an antenna combiner to achieve this. And many combiners in our list are 2-way products, so you can also get more value from them.